Manualshelf

Instruction manual

ManualsBrandsMTS Systems ManualsComputer equipmentVIP 1216 PVR
481482483484485486487488489490
Page 1440 of 3156 Extended DID/DOD Software Support – Europe
553-3001-306 Standard 10.00 January 2002
Call blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1444
Number Reception message . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1444
Operating parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1444
Feature interactions . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1445
Feature packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1446
Feature implementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1446
Task summary list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1446
Feature operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1449
Feature description
This feature provides software support for the European Extended Direct
Inward Dialing (XDID)/Direct Outward Dialing (DOD) cards. These cards
are the NT5K36AA (German XDID pack), NT5K84AA (Swiss XDID pack)
and NTAG04AA (Dutch XCOT/DID). The new packs enable the Meridian 1
to have Intelligent Peripheral Equipment (IPE) DID/DOD functionalities.
These functionalities are:
Seizure acknowledgment on outgoing traffic
In order to provide this functionality, LD 14 has to be modified in order to
allow Ear and Mouth (E&M) signaling to be configured for DID trunk on an
XDID card. A new “Trunk Type and Signaling” in the type 2 Channel
Download message defined for DID-E&M has to be downloaded onto the
firmware. LD 14 must have a configuration of ACWK = YES, and LD 16
must have a configuration of “trunk type” (TYPE) = DID, “signaling”
(SIGL) = EAM, and “start arrangement on outgoing” (STRO) = IMM.
End of dialing on DOD
No software changes are required to provide this functionality.
Interdigit timer on DID
To provide this functionality, the Partial Dial (PRDL) prompt has to be
configured as BSY or YES.