Instruction manual

Page 1436 of 3156 Equal Access Compliance
553-3001-306 Standard 10.00 January 2002
LD 11 – Assign a NCOS to a Digital Telephone.
LD 16 – Enable Equal Access for this route.
The configuration in this example routes all Equal Access calls placed
through BARS/NARS with access code 1 (AC1) over route 10. Set the SPN
to “101”.
In this example set Equal Access toll calls for NCOS = 4. Note that Equal
Access toll calls placed through direct trunk access to route 10 also will be
blocked.
Prompt Response Description
REQ: CHG Change existing set data.
TYPE: aaa Specify set type.
TN l s c u
c u
Terminal Number.
For Option 11C.
NCOS 4 Network Class of Service group number.
Prompt Response Description
REQ CHG Change existing route data.
TYPE RDB Change Route Data Block.
CUST 0-99
0-31
Specify customer number.
For Option 11C.
ROUT 10
EQAR (NO) YES Enter YES to enable Equal Access and selective blocking
for this route. A YES response triggers the next two
prompts.
- NTOL (DENY), ALOW Specify that Equal Access North American calls billed to
originating telephone are to be denied.
- ITOL (DENY), ALOW Specify that Equal Access international calls billed to
originating telephone are to be denied.