Instruction manual

Enhanced Night Service Page 1425 of 3156
Features and Services
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 18 – Configure the Night Number Table as follows.
2 LD 15 – Configure Enhanced Night Service.
3 LD 14 – Configure Enhanced Night Service for trunks.
LD 18 – Configure the Night Number Table as follows.
Prompt Response Description
REQ NEW CHG New, or change.
TYPE SCL Speed Call List number.
LSNO xxx List Number.
Enter the list number (this number will also be entered in
response to the NNT prompt in LD 15).
DNSZ xx Enter the maximum excepted length required.
SIZE 100 Enter 100 to ensure that definitions for Options 1-9 and
Groups 1-9 may be input.
STOR xy z...z Define the Night Number Table entry, where:
x is the Night Service Option number (1-9)
y is the Night Service Group number (1-9), and
z...z is the DN to which calls should be routed.
Note: Night Service Option 0 and Night Service Group 0 are
reserved for the customer Night number and should not be
programmed (i.e., 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10 20, 30,
40, 50, 60, 70, 80, and 90)