Instruction manual

Page 1004 of 3156 China – Flexible Feature Codes
553-3001-306 Standard 10.00 January 2002
Feature interactions
Busy Number Redial
Autodial
Activation of Busy Number Redial changes the activation of Autodial. The
DN that is autodialed becomes the DN that was busy. When the BNR
activation timer expires or the busy DN is redialed when it is idle, the autodial
capability is deactivated, but the number saved is not cleared. If Autodial is
then activated without entering a DN, the number used is the formerly busy
DN.
Activation of Autodial when BNR is active deactivates BNR.
Automatic Set Relocation
Busy Number Redial is deactivated when a set is relocated.
Deactivate Feature FFC
The Deactivate Feature (DEAF) FFC deactivates Busy Number Redial.
Hot Line
Busy Number Redial cannot be used on Flexible Hot Line or Enhanced Hot
Line sets.
Off-Hook Alarm Security
Busy Number Redial cannot be used on a set with Off-Hook Alarm Security
Allowed, since autodial cannot be configured on these sets.
16-Button Dual-tone Multifrequency (DTMF) Sets
Busy Number Redial (BNR) activate can be a postdial function, and BNR
deactivate can be a predial function. Both FFCs may be dialed normally from
a 16-button DTMF telephone.
Customer Call Forward
Customer Call Forward (CCFW) is another way of activating Call Forward
All Calls (CFWAC), therefore all interactions with CCFW not specified
below are the same as with CFWAC.