Instruction manual

End-to-End Signaling Page 1413 of 3156
Features and Services
LD 15 – Enable End-to-End Signaling tone feedback.
LD 12 – Add End-to-End Signaling key to Attendant Console.
Prompt Response Description
REQ: CHG Change.
TYPE: FTR Features and Options.
CUST 0-99
0-31
Customer number.
For Option 11C.
- EEST (NO) YES NO = No EES feedback tone is given to the telephone.
YES = EES feedback tone is given; the type is defined by
the DTMF prompt.
For Option 11, DTMF should be set to NO.
- DTMF (NO) YES NO = Use EES for single feedback tone.
YES = Use EES for DTMF feedback tone.
For Option 11, DTMF should be set to NO.
...
TYPE CDR CDR and charge account options.
- ECDR (NO) YES NO = Do not capture EES digits in the CDR record.
YES = Capture EES digits in the CDR record.
Prompt Response Description
REQ CHG Change.
TYPE ATT 1250 2250 Console type.
TN l s c u
c u
Terminal Number.
For Option 11C.
KEY xx EES Add EES key (xx = key number) (cannot be key 0 or 1).