Instruction manual

Page 1412 of 3156 End-to-End Signaling
553-3001-306 Standard 10.00 January 2002
Interposition call
When an attendant is actively connected to another console using
Interposition Attendant Call, AEES is blocked. During an Interposition Call
Transfer, however, the console that is actively connected to a telephone can
perform AEES, provided the party connected to the other Attendant Console
is excluded.
Meridian Hospitality Voice Services - Digit Key
Attendant End-to-End Signaling and Digit Key are mutually exclusive. Being
in AEES mode overrides the use of the Digit Key.
Trunk connection
On incoming ground start CO or Direct Inward Dialing (DID) trunks without
Answer Supervision, you must press the Release (RLS) key on the console to
exit AEES mode and drop the connection.
Feature packaging
End-to-End Signaling and Attendant End-to-End Signaling are both part of
package 10 and have no feature package dependencies.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 15 – Enable End-to-End Signaling tone feedback.
2 LD 12 – Add End-to-End Signaling key to Attendant Console.
3 LD 56 – Specify the cadence for the EES feedback tone.