Instruction manual

Page 1404 of 3156 End of Selection
553-3001-306 Standard 10.00 January 2002
The End of Selection feature is available with either the QPC357 or
NTD9447 pack for analog trunks, or the QPC536 pack for 2 Mbit digital
trunks. It is not available on 1.5 Mbit digital trunks or Japanese DMI trunks.
If the DN size is specified, the End of Selection feature allows a trunk to be
locked out if the correct number of digits are not received, or if termination
has not been completed when the correct number of digits have been received.
The End of Selection signal is not supported by R2 Multifrequency.
Feature interactions
There are no feature interactions associated with this feature.
Feature packaging
International Supplementary Features (SUPP) package 131.
Feature implementation
Task summary list
The following task is required:
LD 16 – Create or modify data for trunk routes:
LD 16 – Create or modify data for trunk routes:
Feature operation
No specific operating procedures are required to use this feature.
Prompt Response Description
...
EOS (NO) YES End of Selection (EOS) signal is enabled; no EOS signal.
EOS and BSY signals are enabled.