Instruction manual

Page 1384 of 3156 Electronic Brandlining
553-3001-306 Standard 10.00 January 2002
- - - IDLE_DISP_CHAR nn
c
hh
Enter the customized text string
character by character.
c = one supported character
hh = 2 hexadecimal digits (0-9, A-F, a-
f), representing a supported character.
nn (01-24) is the position of the
character in the customized text
string. The IDLE_DISP_CHAR prompt
is only prompted if
SUPPORTED_TEXT_ONLY = NO. It
is reprompted until <CR> only is
entered or until nn is the 24th
character that has been entered.
IDLE_SET_DISPLAY cccc The customized text string (cccc)
entered at the IDLE_DISP_CHAR
prompt is shown. This information is
displayed for confirmation only. It is
confirmed at the following OK prompt.
- - OK
(YES)
NO
Confirm the validated Terminal Text
Broadcast customized text string
(cccc) entered at the
IDLE_DISP_CHAR nn prompts.
Enter YES to keep the new text string
as “cccc”.
Enter NO to input a new Terminal Text
Broadcast customized text string, and
the SUPPORTED_TEXT_ONLY
prompt is re-prompted.