Instruction manual

Page 1382 of 3156 Electronic Brandlining
553-3001-306 Standard 10.00 January 2002
LD 17 – Configure the NORTEL Electronic Brandline.
LD 17 – Enter a customized text string.
Note: To enter a customized text string, the Electronic Brandlining ISM
parameter must be set to Terminal Text Broadcast.
Prompt Response Description
REQ CHG Change existing data.
TYPE PA RM System Parameters.
...
NORTEL_BRAND (YES)
NO
“NORTEL” Electronic Brandline is displayed
(default).
“NORTEL” Electronic Brandline is not displayed.
NORTEL_BRAND is only prompted when the ISM
parameter is set to the default value.
Prompt Response Description
REQ CHG Change existing data.
TYPE PARM System Parameters.
...
IDLE_SET_DISPLAY aaaa The current customized text string
“aaaa” is shown. This information is
displayed for confirmation only.
- - MODIFY
(NO)
YES
Gateway to new EBLN Terminal Text
Broadcast configurations.
Enter NO to keep existing
configuration (default).
Enter YES to prompt for further EBLN
Terminal Text Broadcast configuration.