Instruction manual

Page 1380 of 3156 Electronic Brandlining
553-3001-306 Standard 10.00 January 2002
Display key
When the Display (DSP) key is first pressed, the display screen is blank.
When any other key is pressed after the DSP key is pressed, all relevant
information is displayed.
The Electronic Brandlining custom display is not displayed during the DSP
key process until Lamp Audit updates the display screen with the time and
date (when applicable).
Do Not Disturb
When a set is in the Do Not Disturb (DND) mode, the second line of the idle
display screen is blank. Therefore, the second line displays the Electronic
Brandlining custom display when the Electronic Brandlining feature is
enabled (if applicable).
Limited Access to Overlays
The existing functionality of the Limited Access to Overlays (LAPW) feature
is not changed as a result of the Electronic Brandlining feature.
The Terminal Text Broadcast configuration of a customized text string in
Overlay 17 is password protected by level 2 system administration (PWD2).
The added implementation of PWD2 in Overlay 17 is required to allow
configuration of the Terminal Text Broadcast customized text string.
As per existing functionality, when LAPW is disabled on a system, the PWD2
password is restricted to a 4-digit password composed of the hexadecimal
digits 0-9 and/or A-F.
As per existing functionality, when LAPW is enabled, PWD2 can be
configured as a 16-digit alphanumeric password. LAPW then applies to the
PWD2 prompt.
Make Set Busy
When Make Set Busy (MSB) is activated on a Meridian Modular set, the
second line of the idle display screen shows “SET BUSY ACTIVATED”.
The Electronic Brandlining custom display is not shown when Make Set Busy
is activated.