Instruction manual

Dual Signaling on Analog Trunks Page 1367 of 3156
Features and Services
If Dual Signaling on Analog Trunks is used on a trunk with DPDT
programmed, a DTR is not involved with incoming trunk traffic.
This feature is available on analog DID and TIE trunks only.
CLS DPDT/DTDP can only be configured on routes with the ICOG prompt
set to IAO (incoming and outgoing).
Feature interactions
There are no feature interactions associated with this feature.
Feature packaging
This feature is included in base X11 System Software.
Feature implementation
Task summary list
The following task is required:
LD 14 – Configure the trunk with the Dual Signaling on Analog Trunks Class
of Service.
LD 14 – Configure the trunk with the Dual Signaling on Analog Trunks Class of Service.
Prompt Response Description
REQ CHG Change existing data.
TYPE aaa Trunk type.
xxx = DID, TIE.
TN l s c u
c u
Terminal Number.
Terminal Number of Option 11C.
CLS (DIP)
DPDT
DTDP
Dial Pulse.
Incoming Dial Pulse -outgoing Digitone.
Incoming Digitone - outgoing Dial Pulse.