Instruction manual

Page 1346 of 3156 Distinctive/New Distinctive Ringing
553-3001-306 Standard 10.00 January 2002
For example, suppose New Distinctive Ringing is enabled and a call comes
in from a Distinctive Ringing enabled trunk. If the call terminates on a
Meridian digital telephone with DR2 Class of Service, it rings with DR2
(frequency and warble tone), but with a cadence of 0.512 on and 0.512 off,
followed by 1.024 on and 4.096 off. This also applies to the M3000
Touchphone. If the M3000 custom ringing option is selected, Distinctive
Ringing is overridden.
Telephone features
Calls modified by the following features receive Distinctive or New
Distinctive Ringing:
• Call Forward All Calls
• Call Forward No Answer
• Flexible Call Forward No Answer
• Call Park
• Call Transfer
• Conference
• Hunting
User Selectable Call Redirection
The single parameter previously used to define distinctive ringing cycles
(DFNA) is expanded to three (DFN0-2), with the Ringing Cycle Options
(RCO) parameter used to select the specific DFNA entry for each telephone.
Virtual Network Services
An incoming call using VNS on a Bearer trunk defined with the prompt
DRNG = YES will ignore this value and will perform the treatment as if the
value of this prompt was DRNG = NO.
Feature packaging
Distinctive/New Distinctive Ringing (DNRG) package 74 has no other
feature package dependencies.
Distinctive Ringing for Dial Intercom is included in Dial Intercom (DI)
package 21.