Instruction manual

Direct Private Network Access Page 1319 of 3156
Features and Services
Operational Sequence of Authcode Last
Step User Action Result
1. Makes an outgoing call
that requires Authcode
Last.
Authcode Last Request dial tone is given. If Authcode Last
RAN is defined, RAN precedes the dial tone. The caller
continues to Step 2.
2. Dials one of the
following:
a) A valid Authcode.
b) An invalid Authcode
followed by “#”.
c) An invalid Authcode.
The Authcode Last Request dial tone is removed as soon
as the first digit is dialed. Then depending on the digit input,
one of the following occurs:
a) The call is processed for call termination.
b) If Authcode Last Retry is defined, Authcode Last
Request dial tone is immediately given (if Authcode Last
Retry RAN is defined RAN precedes the dial tone), and the
caller continues to Step 3.
If Authcode Last Retry is not defined, when the interdigit
timer expires the existing invalid Authcode treatment is
given.
c) If Authcode Last Retry is defined:
— If the caller is an attendant, Authcode Last Request dial
tone is immediately given (if Authcode Last Retry RAN
is defined RAN precedes the dial tone), and the caller
continues to Step 3.
— If the caller is not an attendant, when the interdigit
timer expires Authcode Last Request dial tone is again
given (if Authcode Last Retry RAN is defined RAN
precedes the dial tone), and the caller continues to
Step 3.
If Authcode Last Retry is not defined, when the interdigit
timer times out the existing invalid Authcode treatment is
given.
3. Dials one of the
following:
a) A valid Authcode
b) An invalid Authcode
followed by “#”.
c) An invalid Authcode.
The Authcode Last Request dial tone is removed as soon
as the first digit is dialed. Then depending on the digit input,
one of the following occurs:
a) The call is processed for call termination.
b) When the interdigit timer times out, the existing invalid
Authcode treatment is given.
c) When the interdigit timer times out, the existing invalid
Authcode treatment is given.