Instruction manual

Page 1312 of 3156 Direct Private Network Access
553-3001-306 Standard 10.00 January 2002
DISA Digit Insertion
Once a DISA Directory Number (DN) is accessed, the Meridian 1
automatically inserts from 1 to 31 digits to save the caller from having to
manually enter these digits. Dial tone is provided if the system expects to
receive more digits from the caller in order to complete the call. If no
additional digits are required, the call terminates automatically.
DISA Recorded Announcement (RAN)
A caller may be greeted with a Recorded Announcement once a DISA DN is
accessed. The caller can begin dialing anytime during the greeting, in which
case the greeting is stopped and the call is processed. If the Recorded
Announcement finishes, dial tone is provided if more digits are expected from
the caller to complete the call. As with the case of DISA Digit Insertion, the
call terminates automatically if no additional digits are required.
Authcode Last Retry Request
For an Authcode Last Request call, if a caller enters an authorization code
(Authcode) that is invalid, the caller is prompted to enter an Authcode again.
The reprompt for the Authcode takes the form of either an Authcode Last
Retry Request dial tone or a RAN before the Authcode Last Retry Request
dial tone.
If configured, the RAN indicates to the caller that a wrong Authcode has been
entered. While RAN is being given, all dialed digits are ignored.
If a caller realizes they have misdialed, an octothorpe (#) can be pressed
which allows the user to immediately re-enter the Authcode. If an invalid
Authcode is entered for a second time, the existing invalid Authcode
treatment results.
Operating parameters
DISA Digit Insertion, DISA RAN, and Authcode Last Retry can be activated
individually or can be combined to work in conjunction with one another.
DISA Digit Insertion and DISA RAN can be optionally assigned on a per
DISA basis in LD 24, and are only applicable to DISA calls.
Authcode Last Retry can be optionally assigned on a per customer basis in
LD 88, and is applicable to all call types supporting Authcode Last.