Instruction manual

Page 1306 of 3156 Direct Inward System Access
553-3001-306 Standard 10.00 January 2002
LD 24 – Configure the Direct Inward System Access feature for a customer.
Prompt Response Description
REQ NEW CHG Add, or change.
TYPE DIS DISA data.
CUST 0-99
0-31
Customer number.
For Option 11C.
SPWD xxxx System secure data password (0001-9999) allows
modifications to the DISA data block.
0000 = disable the password (see LD 15).
DN xxx...x DN for DISA access.
SCOD X xx...xx DISA security code (1-8 digits).
X = remove security code.
AUTR (NO) YES Authorization Code is not or is required.
TGAR xx Trunk Group Access Restriction to be applied to calls made
using DISA (0-15).
TGAR can be from 0 to 31.
NCOS xx Network Class of Service to be applied to DISA calls.
COS
UNR
CUN
SRE
TLD
CTD
FRE
FR1
FR2
Class of Service to be applied to DISA calls.
Unrestricted.
Conditionally unrestricted.
Semi-restricted.
Toll res tri cted.
Conditionally toll restricted.
Fully restricted.
Fully restricted 1.
Fully restricted 2