Instruction manual

Page 992 of 3156 China – Attendant Monitor
553-3001-306 Standard 10.00 January 2002
Private Line
Attendant Monitor is blocked from monitoring a Private DN.
Feature packaging
This feature is included in base X11 System Software.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 15 – Enable the Attendant Monitor option for a customer, and then
either allow or deny the tone option.
2 LD 12 – Define the Barge-In/Attendant Monitor key and the Busy
Verify/Attendant Monitor key on an Attendant Console.
LD 15 – Enable the Attendant Monitor option for a customer, and then either allow or deny the
tone option.
LD 12 – Define the Barge-In/Attendant Monitor key and the Busy Verify/Attendant Monitor key
on an Attendant Console.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: AT T Gate opener.
- OPT (AMD) AMA (Deny) allow Attendant Monitor.
(TOA) TOD (Allow) deny Attendant Monitor Tone.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE ATT 1250 2250 Attendant Console type.
...