Instruction manual

Direct Inward Dialing Recall Features on DTI2 for Italy Page 1295 of 3156
Features and Services
DID Recall
LD 16 – Set DID Recall to Attendant for this rate.
INCOMING CALLS
P EOSB(S) ABCD End of Selection Busy (receive) signal.
- TIME (100)-150 Duration of the EOSB(S) signal in
milliseconds.
...
P OPRS(R) ABCD Operator (receive) recall signal.
- TIME xxxx yyyy Time for OPRS(R) in milliseconds, where:
xxxx = 8-(48)-2040, and
yyyy = xxxx-(128)-2040.
Prompt Response Description
REQ NEW CHG New, or change.
TYPE RDB Route data block.
...
RCAL DRA Set DID Recall to attendant for this route.