Instruction manual

Direct Inward Dialing Recall Features on DTI2 for Italy Page 1293 of 3156
Features and Services
Forward Busy
The DID offering is available only after the End of Selection Busy signal has
been sent by the Central Office. This signal is provided to the Central Office
trunk only if the busy set is configured with Forward Busy Denied (FBD)
Class of Service.
Network Attendant Services (NAS)
Incoming DID calls which are Offered or Recalled to the attendant may
receive NAS treatment. This feature requires no modification.
Feature packaging
Direct Inward Dialing (DID) Recall Features on DTI2 for Italy are included
in the existing 2 Mbit Digital Trunk Interface (DTI2) package 129, which
requires International Supplementary Features (SUPP) package 131.
Feature implementation
DID Offering
Task summary list
The following is a summary of the tasks in this section:
1 LDs 10/11 –Set the Class of Service to FBD.
2 LD 16 – Set DID Recall for this Rate.
3 LD 73 – Configure the SICA table for the DID Offering feature.
4 LD 16 – Set DID Recall to Attendant for this rate.
5 LD 73 – Configure the SICA table for the DID Recall feature.