Instruction manual

Digital Trunk Interface – Commonwealth of Independent States Page 1277 of 3156
Features and Services
LD 14 – Add or change trunk data for CIS DTI2 incoming and outgoing trunk.
Prompt Response Description
REQ NEW CHG New or change.
TYPE DID COT Direct Inward Dialing (for incoming trunks), or Central Office
Trunk (for outgoing trunks).
...
SICA 2-16 Signaling category table number.
Note: standard default SICA table (number 1) may not be used for
CIS DTI2 trunks. CIS DTI2 trunks for incoming local and incoming
toll calls must have different SICA tables.
PDCA (1)-16 PAD table number.
PCML A Only A-law companding may be used on the CIS DTI2 trunk
line.
...
CIST (NO) YES This prompt appears for incoming trunks only (ICOG = ICT
in LD 16), where:
YES = toll trunk, and
NO = local trunk.
...
CLS (DIPF DIP
(P10) P12
Dial pulse execution, where:
DIP = outpulsing by firmware, digit collection – traditional,
by software, and
DIPF = outpulsing and digit collection are performed by
firmware.
Make-break ratio for dial pulse dialing.