Instruction manual

Page 1272 of 3156 Digital Trunk Interface – Commonwealth of Independent States
553-3001-306 Standard 10.00 January 2002
LD 97 – Define dial pulse make-break ratio.
LD 15 – Define busy tone/overflow tone time out.
LD 16 – Add or change route data for CIS DTI2 trunks.
Prompt Response Description
REQ CHG Change.
TYPE SYSP System parameters.
INTN YES A-law should be used as system companding law.
...
P10R (50)-70 Make-break ratio for primary 10 pulses per second dial
pulse dialing.
P12R (50)-70 Make-break ratio for secondary 10 pulses per second dial
pulse dialing.
P20R (50)-70 Make-break ratio for 20 pulses per second dialing.
Prompt Response Description
REQ: NEW CHG New or change.
TYPE: TIM Gate opener.
...
- BOTO 30 Busy tone/overflow tone time out (in seconds).
Prompt Response Description
REQ NEW CHG New or change.
TYPE RDB Route Data Block.
...