Instruction manual

Digit Display Page 1255 of 3156

Features and Services

Centralized Multiple Line Emulation

The digit display of the station picking up a parked call recall shows the

parked call’s access code followed by the parked call’s access-identification

code. If the picked-up call is a group member call, the display shows the

group number of the picked-up station.

Dial Intercom

The digit display will be cleared when the Dial Intercom Group (DIG) key is

pressed. When the user dials the DI code, the digits of the code are displayed.

When the call is answered, the DI code of the calling party appears on the

display of the called party.

If either party presses the Release key or goes on hook during a DIG call, the

displays of both parties are cleared. If either party presses the Hold key, the

display of the holding station is cleared but the display of the other station

remains unchanged. When the held call is reestablished, the holding station

redisplays the DIG number of the other party.

Digital Private Network Signaling System (DPNSS1)/Digital

Access Signaling System (DASS2) Uniform Dialing Plan (UDP)

Interworking

The digit display rules for DPNSS1 UDP are based on what is currently done

in an MCDN.

Group Hunt

Until a call is answered, the calling party will see the dialed DN. When the

call is answered, the caller will see the dialed DN appended with the DN and

name, if Calling Party Name Display (CPND) is equipped, of the called party.

The terminating set will always see the originating DN appended by a Pilot

Hot Line

A Display key on a telephone with a Hot Line appearance will display the Hot

Line target DN data stored for that key.

INIT ACD Queue Call Restore

Call information associated with Digit Display is lost after system

initialization and call restoration.