Instruction manual

Digit Display Page 1253 of 3156
Features and Services
• Call Waiting party
Pressing the Call Waiting key to answer a waiting call makes that call
active. The call can be placed on hold by pressing the Call Waiting key
again, or by pressing any idle DN key on the set. If the Display key is
pressed before the Call Waiting key, the call waiting party information is
displayed.
• Conference
While in a conference call, the Display (DSP) key can be used to obtain
information on other keys. However, the Display key is blocked when
the CSD key is active.
• DN key (SL-1 and Meridian Modular telephones)
While the key is active (established, outgoing ringing) will show the
source of the destination. While the key is active but not answered (i.e.
ringing) will show the source of the originator. While inactive will show
the number stored that will be used for the 'last number redial' function
(if configured).
• Hot Line
Hot Type I calls are supported by the Display key feature; pressing the
Display key and then the Hot Type I key will show the target DN on the
originating station's display.
• Message Waiting
When the telephone is inactive and the DSP key is pressed, followed by
the Message Waiting key, the number stored against the key will be
displayed.
• Ring Again party
When the telephone is inactive and the DSP key is pressed, followed by
the Ring Again key, the number stored against the key will be displayed.
• Speed Call number
To display a stored entry the user presses the Display key and the Speed
Call key and dials the list number. The list number cannot be abbreviated.
• Voice Call party
When the telephone is inactive and the DSP key is pressed, followed by
the Voice Call key, the number stored against the key will be displayed.