Instruction manual

Page 1252 of 3156 Digit Display
553-3001-306 Standard 10.00 January 2002
Press the Display (DSP) key, then the feature key to display information
associated with these features:
• ACD in-calls
If the Display Key is used to view information defined on the ACD DN
key of an agent serving multiple queues, then the ACD DN displayed
will be the current queue being served if the agent is active on a call. The
last queue is served if the agent is not serving an ACD call or the Primary
ACD DN if the agent is logged out.
• Autodial number
When the telephone is inactive and the DSP key is pressed, followed by
the autodial key, the number stored against the key will be displayed.
• Autoline
To display the DN programmed for the Autoline key, the attendant
presses the Autoline key when the console is idle or in Position Busy. On
an analog console, to display a DN that is longer than eight digits, the
attendant presses the display key after pressing the Autoline key.
• Buzz DN
When the telephone is inactive and the DSP key is pressed, followed by
the Buzz DN key, the number stored against the key will be displayed.
• Call Forward party
When the telephone is inactive and the DSP key is pressed, followed by
the Call Forward key, the number stored against the key will be
displayed.
• Call Park
The Park DN of the most recently parked call can be re-displayed on
Meridian 1 proprietary telephones equipped with displays, a Park key,
and a Display key. This is done by pressing the Display key, then the
Park key. The attendant can display the last call parked by pressing the
Park key when no loop key is active.
• Call Pickup
To display Call Pickup, press the Display key, followed by the Call
Pickup key.