Instruction manual

Digit Display Page 1251 of 3156
Features and Services
Time and Date are displayed with an additional Time and Date (TAD) key.
The following display options are available:
• No Digit Display (NDD)
This is the default option.
• Automatic Digit Display (ADD)
This option allows the display of digit information during call
processing. ADD allows the automatic display of a calling party number
on an incoming call to the Prime DN on a telephone.
• Standard Delayed Display (DDS)
Provides calling party information, displayed after answer only.
• Touchphone Digit Display (TDD)
With this option, when a call is presented to a busy M3000 Touchphone,
the user of the Touchphone can press the Display key to see the Calling
Line Identification information of the new incoming call.
• Tandem Digit Display (TDD)
This option is introduced in X11 Release 23. With this option, when an
incoming call is presented to a busy Meridian 1 proprietary telephone
with display, the Calling Line Identification and Call Party Name
Display information is automatically displayed on the busy telephone.
Automatic displays will show the following:
• Number dialed
• Number of calling party
• Call Pickup
• Call Waiting party, and
• Time and date.
CAUTION
This option should not be used when a Prime DN appears on another
telephone as a Prime DN. Severe real-time penalties will occur
(ERR040 message).