Instruction manual

Page 1250 of 3156 Digit Display
553-3001-306 Standard 10.00 January 2002
• Incoming calls
On incoming calls and forwarded Direct Inward Dialing (DID) calls, the
trunk access code and member number are displayed. For all station
dial-0 calls, the calling station DN is displayed. For recalls, the
destination DN is displayed.
• Display Source/Display Destination keys
Two keys are provided to allow the attendant to display the source and
destination numbers for any connection completed through the console.
• Night assignment
During the assignment of night numbers, the Display Source key may be
pressed after the trunk access code and member numbers have been
dialed to display the correct night assignment.
• Autodial
The DN stored against an Autodial key may be displayed by pressing the
Autodial key, then the Display Source key. If using an eight-digit display
assignment and if the stored DN consists of more than eight digits, the
Display Source key must be pressed a second time to display the
remainder of the DN. When the Autodial number is changed, the new
number may be displayed by pressing the Display Source key.
• Speed Call
The DN stored against a Speed Call code may be displayed by pressing
the Speed Call key, dialing the Speed Call code, and then pressing the
Display Source key. When the Speed Call list is changed, an entry may
be displayed by pressing the Display Source key.
• Time and Date
The time may be displayed by pressing the Display Time key on the
Attendant Console. The date is displayed by pressing the Display Date
key.
Meridian 1 proprietary telephone Digit Display
This feature allows the automatic display of information relevant to normal
call processing and feature activation on any Meridian 1 proprietary
telephone equipped with a 16-digit display. A key/lamp pair is also provided
to enable the station user to obtain information manually, independent of call
processing activity.