Instruction manual

Page 1240 of 3156 Dial Intercom
553-3001-306 Standard 10.00 January 2002
If your phone and the phone you are calling are configured for the voice
option, you can deliver a voice message after two seconds of ringing.
To answer a Dial Intercom call when you are on a line other than your DIG
line:
1 Release the current call or place it on hold.
2 Press Intercom.
Dial Intercom Handsfree Voice Call
Examples of both Handsfree Voice Call options are listed below.
HVA option
The originating telephone (telephone A) places a DIG call to the destination
telephone (telephone B).
• Telephone B rings once.
• After one ring, telephone B automatically answers the call in Handsfree
mode.
The DN and handsfree LCDs are lit and a two-way voice path is
established.
HVD option
Telephone A places a call to telephone B.
• Telephone B rings once.
• After one ring, telephone B automatically answers the call in loudspeaker
only mode.
The DN LCD is lit and the handsfree LCD remains dark, establishing a
one-way voice path from telephone A to telephone B. At this point,
telephone A is unable to hear the person at telephone B.
To establish a two-way voice path, telephone B must either go off hook,
or press the Handsfree button.