Instruction manual

Page 1238 of 3156 Dial Intercom
553-3001-306 Standard 10.00 January 2002
3 LD 11 – Configure Dial Intercom for Meridian 1 proprietary telephones.
4 LD 15 – Configure Handsfree Voice Call for the Meridian 1 system.
LD 15 – Enable Dial Intercom for a customer.
LD 10 – Configure Dial Intercom for analog (500/2500 type) telephones.
Prompt Response Description
REQ: CHG Change.
TYPE: FTR Gate opener.
CUST 0-99 Customer number.
- DGRP 0-2046 Maximum number of DIGs that can be defined for the
customer. The maximum number of DIGs allowed is 2046.
Prompt Response Description
REQ: NEW CHG Add, or change. Single line telephones cannot have both a
Dial Intercom Group number and a standard DN. To add
this feature, you must remove the telephone from the
database and build it again, as a Dial Intercom Group
member.
TYPE: 500 Telephone type.
TN l s c u
c u
Terminal Number.
For Option 11C.
DES a...x ODAS set designator.
a...x = one-to-six character alphanumeric designator.
CUST 0-99 Customer number.
DIG xxxx yy xxxx = Dial Intercom group number (0-2046).
yy = member number (0-99) within the group.
The maximum number of DIGs allowed is to 2046.