Instruction manual

Page 1080 of 3156 CIS ANI Reception
553-3001-306 Standard 10.00 January 2002
Task summary list
The following is a summary of the tasks in this section:
1 LD 73 - Define Multifrequency Advanced (MFA) as firmware type
definition.
2 LD 14 - Add Calling Number Identification Allowed (CNA) as a class of
service for incoming Direct Inward Dial (DID) CIS DTI2 trunks.
3 LD 16 - Define the CIS Route.
LD 73 - Define Multifrequency Advanced (MFA) as firmware type definition.
Prompt Response Description
REQ CHG Change existing data.
TYPE DTI2 Digital Trunk Interface loops.
FEAT LPTI Loop Timers and additional definitions.
CDTI2 YES CDTI2/CSDTI2 card
... ...
CISFW MFA Multifrequency Shuttle protocol handling + ANI Reception +
Firmware Dial Tone Detection capabilities are supported by
the card.
- MFSL (0)-3 The MFS signals transmission level. The prompt appears
when CISFW is set to MFS or MFA and the CISMFS
package is equipped.
The transmission level may be set to the following values:
0 = -7.3 dB
1 = -5.0 dB
2 = -3.5 dB
3 = 0 dB
- 500L (0)-1 ANI request tone (500 Hz) transmission level. The prompt
appears when CISFW is set to MFA.
The transmission level may be set to the following values:
0 = -7.3 dB
1 = -3.5 dB