Instruction manual

Page 1076 of 3156 CIS ANI Reception
553-3001-306 Standard 10.00 January 2002
The CAC digit is separated from the ANI number by the minus sign. When
displaying ANI, there are several options available for CAC display. If ANI
request is repeated several times during a single call, each time new ANI
digits overwrite old ANI digits on the display. If the DN key that requested
the ANI information is placed on hold when the ANI digits arrive from the
CDTI2 card, the ANI digits are not displayed. In this case, when the call is
returned from hold, the ANI digits are displayed.
ANI Digits in CDR
The ANI digits are placed in the CDR at the place intended for the R2MFC
CNI digits. The CAC may be stored in the CDR together with the ANI digits.
The presentation of the CAC in the CDR is configured at the route data block
level as shown in the dash list below. The CAC may be either:
• placed before the ANI digits
• placed after the ANI digits
• not placed in the CDR
The CDR records containing ANI are generated only if the CDR options are
configured in the customer data block (Overlay 15) as described in the CDR
NTP.
The feature does not change the CDR output formats. The ANI digits are
stored in the CDR in the same way as the R2MFC CNI digits.
Figure 22
ANI Display options
2-1234567
1234567-2
1234567
CAC
before
CAC
after
CAC
is not