Instruction manual

Page 1168 of 3156 Conference
553-3001-306 Standard 10.00 January 2002
Call Page Network Wide
A station set or Attendant Console that conferences an external Call Page
Network Wide (PAGENET) uncontrolled call is not blocked. However, an
external PAGENET controlled call is blocked.
Call Park
A parked call can be accessed after Conference is activated
Call Party Name Display
When pressed during an active call, or to set up a conference, the Conference,
Connect, or Join Parties key clears the display. The telephones involved in the
conference have blank displays. If the conference returns to a two-way only
call, each telephone displays the DN and name of the other telephone.
Call Pickup
This feature cannot be activated during a conference call. Meridian 1
proprietary telephones can activate Call Pickup if an idle Directory Number
(DN) key is available. The conference call must be put on hold before
pressing the idle DN key to pick up the call.
Call Pickup Network Wide
Call Pickup Network Wide may be used to pickup an enquiry call from a
conference, subject to the same limitations as apply to Call Transfer.
Call Transfer
Conference can be used to transfer calls, eliminating the need for a separate
Call Transfer key/lamp pair on Meridian 1 proprietary telephones. Calls in
the ringing state cannot be transferred with Conference. The third party must
answer before the transfer can be completed.
A conference can also be established after initiating a Call Transfer operation.
After the third party answers, pressing the Conference key establishes a three-
way conference.
When a switchhook flash transfers calls on analog (500/2500 type)
telephones with three-party conference (C6A) Class of Service, the
transferring party goes on hook, leaving the other two parties established.
Telephones with a C6A Class of Service involved in a conference having
more than three parties must add the last party to the conference, then flash
the switchhook and go on hook to complete the transfer.