Instruction manual

Conference Page 1167 of 3156
Features and Services
Attendant Console
Three-party Conference (C6D) allows analog (500/2500 type) telephones on
established calls to flash the switchhook and Dial 0 to talk to the attendant.
Six-party conference users follow the same sequence, but the conference loop
is seized and the call is treated as a conference call. When only two parties
remain from the conference, the call is returned to a simple call if neither of
the remaining parties is an Attendant Console.
Attendant Overflow Position
An Attendant Overflow Position (AOP) call answered on an AOP DN may
be conferenced with another DN.
Autodial Tandem Transfer
The Autodial Tandem Transfer feature is blocked during Conference and No
Hold Conference calls.
Automatic Redial
When an Automatic Redial (ARDL) call is not accepted by the calling party,
the Conference (A03 or A06) key is ignored.
B34 Codec Static Loss Plan Downloading
B34 Dynamic Loss Switching
When a conference connection is established, no pads are switched in on the
trunk side; any extra loss that is required is provided by the conference circuit
based on an algorithm which takes into account the number of lines and
trunks.
Call Forward All Calls
On analog (500/2500 type) telephones, Call Forward All Calls can be
activated or canceled during a conference call.
Call Forward by Call Type
Calls modified by Conference receive Call Forward by Call Type treatment
for the conferenced telephone. If party A calls party B, and B tries to
conference in party C, the forwarding DN and Class of Service are that of C.
For example, Joan and Bob are in conversation, and they try to conference in
Mack. Mack is not at his desk, so the attempted conference call is sent to the
destination associated with Mack’s telephone.