Instruction manual

Page 1156 of 3156 Collect Call Blocking
553-3001-306 Standard 10.00 January 2002
Feature packaging
Collect Call Blocking (CCB) package 290 must be provisioned to activate
this feature.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 16 – Enable Collect Call Blocking on a route and configure timers.
2 LD 14 – Setup the firmware timing for XFCOT and EXUT cards.
3 LD 15 – Allow Collect Call Blocking for attendants.
4 LD 10 – Enable Collect Call Blocking for analog (500/2500 type)
telephones.
5 LD 11 – Enable Collect Call Blocking for Meridian 1 proprietary
telephones.
6 LD 23 – Enable Collect Call Blocking on ACD queues.
7 LD 24 – Enable Collect Call Blocking on DISA blocks.
8 LD 87 – Enable Collect Call Blocking on CDP Steering codes.
LD 16 – Enable Collect Call Blocking on a route and configure timers.
Prompt Response Description
REQ NEW
CHG
Add.
Change.
TYPE RDB Route Data Block.
CUST 0-99
0-31
Customer number.
For Option 11C.
ROUT 0-511
0-127
Route Number.
For Option 11C.
TKTP aaa Trunk type. Must be COT, DID, FEX, or WAT for CCB.
...