Instruction manual

CLID on Analog Trunks for Hong Kong (A-CLID) Page 1147 of 3156
Features and Services
Information Notification Service for Japan
The A-CLID feature does not work with the Information Notification Service
for Japan (INS-J) feature.
Private Line Service
A-CLID information does display on the telephone.
Feature packaging
This feature requires Analog Calling Line Identification (ACLI) package 349
Feature implementation
Task summary list
The following task is required:
LD 14 – Configure analog CLI.
Use the Calling Line Identification Allowed (CLIA) Class of Service (CLS)
in Overlay 14 to activate the A-CLID feature on an individual port basis.
Note: If EXUT is configured on a DXUT-A card pack, and the ACLI
package is equipped, then the default CLS is Calling Line Identification
Denied (CLID) for all incoming CO trunks to that card.
LD 14 – Configure analog CLI.
Prompt Response Description
REQ CHG
NEW x
Change existing data block.
Add new data block to the system. Follow NEW
with a value of 1-255 to create that number of
consecutive trunks.
TYPE COT Central Office Trunk data block.
.... ....
XTRK EXUT Enhanced Extended CO trunk card.
.... ....
SIGL LOP Loop start