Instruction manual

Page 1146 of 3156 CLID on Analog Trunks for Hong Kong (A-CLID)
553-3001-306 Standard 10.00 January 2002
This feature does not change the functionality of R2-MFC trunks. R2-MFC
trunks display the route access code number when the CLI information is not
available, and not the member number.
If the system receives unrecognized messages or parameter types, the call
terminates without displaying the CLID (“UNAVAILABLE” and “O-Route
access code number - Member number” for name and number displays).
The A-CLID feature delays the occurrence of the first ring. The terminating
set rings when the complete FSK message is received, or the software times
out waiting for the FSK message.
When a DISA call is abandoned, the CO trunks will be busy for a short period
of time before disconnecting. This is characteristic of CO trunks.
Feature interactions
Attendant Call Extension
If an attendant extends a call from an incoming A-CLID CO trunk, the
terminating set receives the analog CLI information.
CLASS: Calling Number and Name Delivery
The analog CLI information is given to the XCMC service pack to provide
number and name display to analog CLASS telephones. The CLASS
telephones can only display the CLI information when the incoming CO call
is auto-terminated on that telephone.
For calls terminating on a CLASS set, only the:
• calling party number and name information display.
• first 15 characters of the information display.
Direct Inward System Access (DISA)
If a user connects to the Meridian 1 system through Direct Inward System
Access (DISA) dialing, the incoming trunk information is passed, not the
DISA DN information.