Instruction manual

Page 1142 of 3156 CLID on Analog Trunks for Hong Kong (A-CLID)
553-3001-306 Standard 10.00 January 2002
The A-CLID information is treated similar to ISDN CLID for delivery to
other modules and applications in the system, including the display on digital
telephones and consoles at the local node and other network nodes (if any).
You can enable or disable A-CLID on an individual trunk port basis.
The A-CLID information passes to the terminating party, which includes:
• Trunks - ISDN (PRI/BRI/QSIG), R2MFC (DTI/DTI2, Analog)
— Calling Party Number information can be tandemed over all ISDN
and R2MFC interfaces
— Calling Party Name information can be tandemed only on SL1 and
QSIG ISDN interfaces. R2MFC does not support name information.
• Terminals - Attendant Consoles, Telephones (CLASS, 2208 with
display, 2216, 2616, 2317, 5317, M3000, M3902, M3903, M3904,
M3905)
• Applications - Call Pilot, Customer Controlled routing, Meridian Mail,
Meridian Link, Symposium Call Center Server (calling party number
only)
Figure 34 describes the feature operation.