Instruction manual

CLASS: Visual Message Waiting Indicator Page 1139 of 3156
Features and Services
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1 LD 10 - Configure a CLASS set as an analog (500/2500 type) set, and
configure the required Class of Service for the set.
2 LD 13 - Configure the CLASS modem unit (up to 255 CLASS modem
units may be configured per Meridian 1 system).
LD 10 - Configure a CLASS set as an analog (500/2500 type) set, and configure the required Class
of Service for the set.
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN l s c u
c u
Terminal address for the set, for Options 51C, 61C, 81C,
where l = loop, s = shelf, c = card, u = unit.
For Option 11C, where c = card, u = unit.
CUST xx Customer number, as defined in LD 15.
xx = 0-99 for Option 51C, 61C, 81C.
xx = 0-31 for Option 11C.
...
DN xxxx Directory Number for the set.
...
CLS Class of Service for the CLASS set.
MWA
LPA
CNUA
CNUS
CNAA
Message Waiting Allowed.
Visual Indication (Lamp) Allowed.
Note: At least one of the following CLASS CLS must be
allowed.
CLASS Calling Number Multiple Data Format Allowed.
CLASS Calling Number Single Data Format Allowed.
CLASS Calling Name Multiple Data Format Allowed.