Instruction manual

CLASS: Calling Number and Name Delivery Page 1129 of 3156
Features and Services
Note 1: You may print the CLASS_FMT information included in the
CLID using LD 21.
Note 2: You may print or count the station sets class of service using
LD 81. This information would typically be used for billing purposes, to
bill set users for calls according to the assigned class of service.
LD 10 - Configure the CLASS Calling Name and Calling Number Delivery Class of Service for
Analog (500/2500 type) sets.
ENTRY aaaa SAVED
ENTRY aaaa DELETED
ENTRIES aaaa-bbbb DELETED
Displayed message. Refer to the ENTRY prompt
description.
...
Prompt Response Description
REQ: CHG Change existing data.
TYPE: 500 Telephone type.
TN l s c u
c u
Terminal address.
For Option 11C.
...
DN x..x yyyy Directory Number for this set (x..x) and CLID entry
associated with this set (ENTRY configured in LD 15).
(CNUD)
CNUA
CNUS
(CNAD)
CNAA
CLASS Calling Number Delivery Denied.
CLASS Calling Number Multiple Data Format Allowed.
CLASS Calling Number Single Data Format Allowed.
CLASS Calling Name Delivery Denied.
CLASS Calling Name Multiple Data Format Allowed.
Refer to the section “Configure CND Class of Service on
CLASS sets” on page 1099 for details.
Note: These Class of Service entries are not valid for a Dial
Intercom Group (DIG) set.