Instruction manual

Page 1128 of 3156 CLASS: Calling Number and Name Delivery
553-3001-306 Standard 10.00 January 2002
LD 15 - Configure the CLASS CLID parameters in the Customer Data Block.
Prompt Response Description
REQ: CHG Change or delete existing data.
TYPE: NET Networking data.
CUST xx Customer number.
...
CLID
(NO)
YES
CLID option.
NO = (the default) do not configure a CLID table. In this
case, the remaining prompts are not generated, and no
CLID is sent for the customer.
YES = configure a CLID table for the customer.
- SIZE 0-(256)-4000 The maximum number of CLID entries that are required.
...
- ENTRY aaaa
Xaaaa
Xaaaa Xbbbb
<CR>
aaaa = CLID entry to be configured.
Xaaaa = CLID entry to be deleted.
Xaaaa Xbbbb = CLID entries to be deleted.
aaaa and bbbb must be a value between 0 and (SIZE-1).
The action for the entry will be saved to system memory
after the CLID entry has been completely configured. If
an existing CLID entry is changed, the message
“ENTRY aaaa SAVED” is displayed. If a CLID entry or
CLID entries is/are deleted, the message “ENTRY aaaa
DELETED” or “ENTRIES aaaa-bbbb DELETED” is
displayed.
...
- LSC 0-9999999
X
Local steering code, 1-7 digits.
X = delete digits.
- - CLASS_FMT (DN)
LCL
NTN
Send internal DN to a CLASS set as the calling number.
Send local number to a CLASS set as the calling
number.
Send National Number to a CLASS set as the calling
number.