Instruction manual

CLASS: Calling Number and Name Delivery Page 1123 of 3156
Features and Services
Calling Line Identification Restriction for ISDN BRI sets
When an ISDN BRI set, with Calling Line Identification Restriction active,
makes a nodal call to a CLASS set with Calling Name Delivery active, the
calling name privacy indicator will be delivered as the calling name.
Conference/No Hold Conference
When a set initiates a conference call to a CLASS set, the Calling Name and
Number of the initiating set is delivered to the CLASS set.
Dial Intercom
The CLASS Calling Name and Number class of service cannot be configured
on Dial Intercom Group sets.
Direct Inward System Access (DISA)
If a call is made to a CLASS set via DISA dialing, then the Calling Name and
Number delivered to the CLASS set is that of the incoming trunk and not the
DISA DN. This is consistent with the normal display function for DISA calls.
Display of Calling Party Denied
When a set with Display of Calling Party Denied active makes a nodal call to
a CLASS set with Calling Number Delivery active, then the calling name
privacy indicator is delivered in place of the calling name.
Distinctive Ringing
The normal delivery cycle for Calling Name and Number Delivery applies to
calls presented to a CLASS set with distinctive ringing, that is, the Calling
Name and Number Delivery information is delivered during the first silent
period that is longer than two seconds.
Flexible Numbering Plan (FNP) Enhancement
For a customer equipped with the FNP package 160, the calling number
delivered to the CLASS set can be of any length, up to 10 digits.
For a customer not equipped with FNP, the following apply:
• For a station (set or attendant) making a call to a CLASS set, if the local
public number is to be delivered to the CLASS set as the calling number
of the calling station, then the Meridian 1 software will pad or truncate
the calling number to be exactly seven digits long.