Instruction manual

Page 1122 of 3156 CLASS: Calling Number and Name Delivery
553-3001-306 Standard 10.00 January 2002
Due to firmware limitations on some types of CLASS sets, after a call has
been disconnected, the CND information associated with the disconnected
call may still appear on the CLASS set’s display for several seconds. During
this time, the CLASS set cannot display new CND information. Though the
Meridian 1 delivers the CND information pertaining to a new call, there is no
guarantee that the CLASS set will display the delivered information.
Feature interactions
Attendant Call Extension
When an attendant extends a call to a CLASS set, the Calling Name and
Number of the attendant is delivered to the CLASS set, and not that of the
extended station.
Automatic Wake Up
When an Automatic Wake Up call is presented to a CLASS set with Calling
Name Delivery activated, then the calling name unknown indicator is
delivered in place of the calling number.
Blind Transfer
When a Meridian 1 proprietary set completes a Blind Transfer to a CLASS
set, the Calling Name and Number of the transferring set is delivered to the
CLASS set, and not that of the set being transferred. When an analog (500/
2500 type) set completes a Blind Transfer to a CLASS set, the transfer is
presented as a new call to the CLASS set. Therefore, the Calling Name and
Number of the transferred set is delivered to the CLASS set.
Call Forward All Calls
When a call is redirected to a CLASS set via Call Forward All Calls, the
Calling Name and Number of originating set, and not that of the forwarding
set, is delivered to the CLASS set.
Call Forward, Internal
When a call is redirected to a CLASS set via Internal Call Forward, the
Calling Name and Number of originating set, and not that of the forwarding
set, is delivered to the CLASS set.
Call Transfer
When a Call Transfer has been completed, the Calling Name and Number of
the transferred party will not be delivered.