Instruction manual

CLASS: Calling Number and Name Delivery Page 1099 of 3156
Features and Services
Configure CND Class of Service on CLASS sets
In Overlay 10, the system administrator may configure a CLASS set to
deliver both Calling Number Delivery, Calling Name Delivery, or both.
To activate only Calling Number Delivery, the station set is to be configured
with one of the following class of service:
• CLASS Calling Number Single Data Message Format Allow (CNUS) or
• CLASS Calling Number Multiple Data Message Format Allow (CNUA)
Subsequently, whenever a call is presented to that set, the Meridian 1
software will deliver the date and time stamp information (see the Date and
time stamp information section which follows below) and the calling number
information (see the Calling number information section which follows on
page 1100), per the Bellcore CLASS CND delivery standard.
To activate only Calling Name Delivery, the station set is to be configured
with the Calling Name Multiple Data Message Format Allow (CNAA) class
of service. Subsequently, whenever a call is presented to that set, the
Meridian 1 software will deliver the date and time stamp information and the
calling name information (see the Calling name information section on
page 1102), per the Bellcore CLASS CND delivery standard.
To activate both Calling Number Delivery and Calling Name Delivery, the
station set is to be configured with both the CLASS Calling Number Multiple
Data Message Format Allow (CNUA) and the CLASS Calling Name
Multiple Data Message Format Allow (CNAA) class of service.
Subsequently, whenever a call is presented to that set, the Meridian 1
software will deliver the date and time stamp information, the calling number
information, and the calling name information, per the Bellcore CLASS CND
delivery standard.
Date and time stamp information
The date and time stamp information delivered to a CLASS set is in the
format mm dd hh mm, where mm is a two-digit number for the month, dd is
a two-digit number for the day of the month, hh is a two-digit number for the
military hour of the day, and mm is a two-digit number for the minute of the
hour. It is up to the CLASS set to display the date and time stamp information.