Instruction manual

Meridian 1 Attendant Console Enhancements Page 2031 of 3156
Features and Services
Feature operation
Attendant Console Autoline key
To place an Autoline call:
1 The attendant presses a Loop key. The Loop key lamp is lit.
2 The attendant presses the Autoline key. The pre-programmed number on
the Auto-line key is automatically dialed. The Source (SRC) lamp on the
Attendant Loop key winks.
3 The dialed party answers the call, and the SRC key lamp is steadily lit.
To extend a currently active call to the Autoline DN:
1 The attendant is active on an established call.
2 The attendant presses the Autoline key to extend the call.
3 The pre-programmed number on the Autoline key is automatically
dialed. The destination (DEST) lamp on the Attendant Console winks.
4 The dialed party answers the call, and the DEST lamp is steadily lit.
5 To complete the transfer, the attendant presses the Release (RLS) key.
Once the Release key is pressed, the display is cleared.
ANUM 1 - 63 Attendant Number.
...
IADN xxxx Individual Attendant DN for this Attendant Console.
The Individual Attendant DN can be 1-4 digits in length or 1-
7 digits in length if DNXP package 150 is equipped.
The IADN cannot be a Multiple Appearance DN.