Instruction manual

CIS ANI Digits Manipulation and Gateways Enhancements Page 1065 of 3156
Features and Services
LD 16 - Configure the ANI table entry in the Route Data Block for incoming R2MFC route.
Prompt Response Description
REQ NEW Add new data.
TYPE RDB Route Data Block.
... ... ...
MFC YES Configure Multifrequency Compelled signaling.
- MFCI x MFC Incoming Table.
- MFCO x MFC Outgoing Table.
... ...
ICOG IAO
INC
Incoming and Outgoing.
Incoming.
NCNI 1 Request CNI after the defined number of digits are
received. CNI is requested during incoming MFC call
after the first digit of dialed number has been received.
ANIE (0)-x ANI table Entry for Route (configured under prompt
R_ENTRY, OVL 15).
x = R_SIZE-1.
R_Size is the maximum table entry number that can be
configured. (R-SIZE is defined in LD 15).
CAC_CONV (0)-31 CAC conversion table number for CIS Gateway.
Configured against MFC_ENT in LD 15.
Prompted only for non “outgoing only” R2MFC route.