Instruction manual

Page 2006 of 3156 Meridian 1 Attendant Console Enhancements
553-3001-306 Standard 10.00 January 2002
In order for an Autoline call to be placed, the attendant presses a Loop key
and then presses the Autoline key. When the Autoline key is pressed, the pre-
programmed number is automatically dialed.
Figure 56 shows an Attendant Console display when an Autoline call is
placed. In this example, the attendant places an Autoline call to Terry Smith
at DN 2029. The attendant presses the Loop key and then the Autoline key
that is configured to dial Terry Smith’s DN. In this case, once the Autoline
key is pressed, the attendant display is as shown in Figure 56.
Figure 56
Attendant display when the Autoline functionality is in progress
Figure 57 shows an Attendant Console display when an Autoline call is
placed to an Autoline DN that is external to the Meridian 1 system. In this
example, the Autoline key is programmed for 911 Emergency. When the
attendant presses the Loop key and then the Autoline key, the display shows
the external DN that is programmed for the Autoline key. In this case, the
external DN is 911.
Figure 57
Attendant display when the attendant places an Autoline call to an external Autoline DN
If an attendant is already active on a call and wishes to extend that call to the
Autoline DN, the Autoline key is pressed to extend the call.
553-7607.EPS
23-Nov-97 Meridian 1 4:57:44 pm
2029-Terry Smith ACTIVE
553-7609.EPS
23-Nov-97 Meridian 1 4:57:44 pm
911 ACTIVE