Instruction manual

Page 1986 of 3156 Malicious Call Trace Idle
553-3001-306 Standard 10.00 January 2002
LD 15 – Enable the MCT signal.
LD 94 – Create or modify the MFC tables.
LD 16 – Create or modify data for each DID trunk route data block to allow or deny MFC Signaling
option.
Prompt Response Description
REQ: CHG Change.
TYPE: FTR Gate opener.
...
- OPT MCTA Malicious Call Trace signal is allowed for attendants at this
customer location.
Prompt Response Description
TYPE MFT Multifrequency table.
ICOG ICT OGT Incoming Table, Outgoing Table.
TBNO 1 - 127 MFC Table number.
XMIT IDCT n Idle Call Trace Signal number.
Prompt Response Description
MFCI (0) - 127 MFC Incoming table number.
AUTO NO Auto terminate.
MFCO (0) - 127 MFC Outgoing table number.
AUTO YES Auto terminate.