Instruction manual

Malicious Call Trace Page 1973 of 3156
Features and Services
LD 14 – Enable Firmware timing for trunk hook flash (if available).
LD 73 – Define the DTI2 flash time range.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE DID COT Trunk type.
TN l s c u
c u
Terminal Number.
Terminal Number for Option 11C.
XTRK EXUT XCOT Card type
FWTM (NO) YES Firmware timing for the trunk hook flash is available. This
prompt is set to YES if firmware timing for trunk hook flash
is supported by the card.
CUST 0-99
0-31
Customer number.
For Option 11C.
RTMB xxx yyy xxx – Trunk route.
yyy – Member number for RCD.
Prompt Response Description
REQ NEW CHG PRT New, change, or print.
TYPE DTI2
FEAT abcd Digital signaling category.
SICA 2-16 SICA table number.
...
FALT (R) abcd
N
Received bits.
If FALT (receive) signal is not required.