Instruction manual

Malicious Call Trace Page 1971 of 3156
Features and Services
Note: In order to activate Malicious Call Trace from an analog (500/
2500 type) telephone without using the SPRE and 83, the MCT FFC has
to be defined.
LD 57 – Define the MCTFFC.
Note: For analog and 1.5 Mbps digital trunks, the flash range to be sent
to the Central Office is configured using the FLH timer. In order to send
the string to the Central Office, MCCD has to be defined
LD 16 – Configure the call trace string.
TYPE RDB Route data block.
TKTP DID COT Direct Inward Dial or Central Office trunks.
ALRM (NO) YES Malicious Call Trace is allowed for external calls when the
response is YES.
Prompt Response Description
REQ CHG Change.
TYPE FFC Flexible Feature Code.
CUST 0-99 Customer number.
CODE MTRC Malicious Call Trace.
MTRC xxxx Flexible Feature Code for Malicious Call Trace.
Prompt Response Description
REQ NEW
CHG
Add new data.
Change existing data.
TYPE RDB Route data block.
RCLS (EXT) INT Class marked route as (external) or internal.
...