Instruction manual

CIS ANI Digits Manipulation and Gateways Enhancements Page 1059 of 3156
Features and Services
LD 11 - Configure the CAC for CIS and MFC signaling for digital sets.
- VMB aaaa Voice Mailbox.
- ANIE (0)-N ANI Entry:
It is of (0)-N where N=S_SIZE in customer data
block.
If ANIE=0, no entry is associated with the DN key.
The old mechanism will be used for building the ANI
message.
If ANIE is of 1-N:.
• If ANIC=YES for the outgoing CIS route
where the call takes place, then the
components of the ANI message are
retrieved from the ANI entry in Customer
Data Block, if configured.
• If the given ANI Entry is not configured, or if
ANIC=NO for the outgoing CIS route where
the call takes place, then the old mechanism
is used for building the ANI message.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: aaa Meridian 1 proprietary set.
TN l s c u
c u
Terminal number for Options 51C through 81C.
Terminal number for Option 11C.
CUST xx Customer number.
xx = 0 - 99 for Options 51C through 81C.
xx = 0 - 31 for Option 11C.
... ...
CAC_CIS 0-(3)-9 CIS ANI Category Code.
CAC_MFC (0)-10 MFC CNI Category Code.