Instruction manual

Page 1968 of 3156 Malicious Call Trace
553-3001-306 Standard 10.00 January 2002
LD 10 – Enable MCT on an Analog (500/2500 type) telephone.
Note: In order to activate Malicious Call Trace from a Meridian 1
proprietary telephone, it should have CLS MCTA, and the TRC key
should be defined. However, the same function can be achieved using a
transfer or conference key and the SPRE + 83 or the MCT FFC.
LD 11 – Enable MCT on a Meridian 1 Proprietary Telephone.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: 500 Analog (500/2500 type) telephone data block.
TN l s c u
c u
Terminal Number.
Terminal Number for Option 11C.
CLS MCTA, MCTD Malicious Call Trace is allowed if Class of Service is MCTA.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE: xxxx Meridian 1 proprietary telephone type.
TN l s c u
c u
Terminal Number.
Terminal Number for Option 11C.
CLS (MCTD), MCTA Malicious Call Trace is allowed if Class of Service is MCTA.
...
KEY xx TRC Key number; Malicious Call Trace.
Allowed when CLS = MTA.
Key lamp not required. MCT is applied on a TN basis.
This key can be configured on ACD telephones.