User's Manual

User Manual

this page, you can set an IP address for the DSL IPv6 router, enable the

DHCPv6 server, enable RADVD and enable the MLD snooping function.

 Enable DHCPv6 Server:

IDE-DHCPv6 is an open-source implementation

of dynamic host configuration protocol for IPv6 (DHCPv6) originally

developed by the KAME project. The implementation mainly complies with

the following standards: RFC3315, RFC3319, RFC3633, RFC3646,

RFC4075, RFC 4272 etc.

 Enable RADVD: The router advertisement daemon (RADVD) is run by Linux

or BSD systems acting as IPv6 routers. It sends router advertisement

messages, specified by RFC2461, to a local Ethernet LAN periodically and

when requested by a node sending a router solicitation message. These

messages are required for IPv6 stateless auto-configuration.

 Enable MLD Snooping: Multicast Listener Discovery Snooping (MLD

Snooping) is an IPv6 multicast constraining mechanism that runs on Layer 2

devices to manage and control IPv6 multicast groups. By analyzing received

MLD messages, a Layer 2 device running MLD Snooping establishes

mappings between ports and multicast MAC addresses and forwards IPv6

multicast data based on these mappings.